30/45/60 Degree Small Roland Compatible Vinyl Cutter Blades，AA Grade 5pcs/pack | Инструменты

30/45/60 Degree Small Roland Compatible Vinyl Cutter Blades，AA Grade 5pcs/pack | Инструменты

Description:
The 30/45 degree blades are good general purpose blades that do a very good job cutting both large and small letters/shapes in vinyl. There are 5 pcs in 1 pack.

The 60 degree blades are the best at cutting large letters and shapes great with reflective vinyl and magnet material. There are 5 pcs in 1 pack.

• Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs.
• Made by  computer controlled CNC machines.
• The speed of carving is extremely quick.
• Blades are 30/45/60 degree for standard cutting.
• Use as replacement blades when original wears out.
• Easy to install.
• Cuts sign and heat transfer materials.

•High quality and extra long life OEM blades.
• Computer controlled CNC machines ensure precision and cutting accuracy.
• The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed.

Compatible with the following cutters:Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market.
It can be used with Roland GX24, GX300, GX400, GX500, GX640, SP-540, SP-540I, SP-540V, SP-300,  SP-300I, SP-300V, VP-300, VP-300I, VP-300V, VP-540, VP-540V, VP-540I vinyl cutters.

• Excellent for cutting vinyl, photo - stencil films & other thin films, etc.
• Superior cutting of the most intricate designs.

•Material:Extra accuracy and high density tungsten cemented carbide
•Blade size:23mm±1mm
•Diameter:2mm
•Knifepoint offset:0.25mm and 450-1500

Note:
From the technical level, using a 60 degree blade on everyday cutting is a waste, less of the blade's cutting area is used, and blade life is wasted. The more horizontal cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer. So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.