ДТ_ДИАТУЛ 1шт 32мм лазеро-сварные алмазные сухие коронки для сверления твердого гранита мрамора с боковой защитой M14 соединение

ДТ_ДИАТУЛ 1шт 32мм лазеро-сварные алмазные сухие коронки для сверления твердого гранита мрамора с боковой защитой M14 соединение

Product Name:Laser Welded Diamond Dry Drilling Core Bits With Side Protection With M14 Connection

Specification:Diameter: 32MM, Total length: 100MM,  Thread: M14(Make sure it can be installed on your machine); Diamond height 10mm;

Quantity:1pc 32mm

Feature:

Turbo segments provide aggressive drilling speed

SUPREME Grade and Special bond matrix extends drilling life and improve the working efficiency

Laser welded technology avoid segments off when dry working

Ideal for drilling the faucet mounting holes in stone countertops, plumbing lines in showers and vanities

Vacuum brazed side protection offers clean cut & steel core protection (inside and outside both)

Drilling hard granite marble all mature stone concrete

Dry or Wet Drilling - use wet will greatly prolong the segment life         

Operation tips:

1. Fix it on angle grinder tightly and rightly

2. Turn on the angle grinder and let the core bits rotating in the air to check if there is balance problem.

3. Hold the machine very steadily and give gentle pressure

4. Start drilling as per following instructions:

   1) place the drill at a 30 degree angle, it will help to position

   2) When Drilling the material till the hole start to form

   3) Bring the drill up into upright position slowly then keep drilling vertically.

5. Do not give too much pressure or sway the core bits when working.

================THE END================

available diameter:  6mm, 8mm, 10mm, 12mm, 14mm, 18mm, 20mm, 25mm, 32mm, 35mm, 38mm, 50mm, 58mm, 65mmm, 75mm, 102mm

Ref. Brand: This product is marked our "DT-DIATOOL" brand name.  If you need these diamond disc without our brand, please leave us message.  we could send you products without brand. We also provide brand-customizing service  (If you order more 20pcs, we could mark your brand name on these products).

Note:

Please allow 1-3mm errors due to manual measurement

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same